Publicité
USABLEFUNCTIONSFOR
RECORDING
Synchronized analog recording
Recording pauses when there is no sound,
and resumes automatically when the sound
begins again.
When
recording
a meeting
, it will only
record when someone
is speaking
and
saves the disc space.
1 Set SYNCHROto
ON.
2 Start recording.
The recording pauses when the sound
source isbelow a certain level for4 seconds
and resumes when the sound begins.
You can restart recording
by pressing
-11
while in recording pause mode.
After recording, press W.
Synchronized digital recording
During digital recording from an Aiwa mini
component,
the
recording
is always
synchronized
with the operation
of the
connected unit.
Connectthe unittoan Aiwaminicomponent
with the supplied optical digital cable.
1
2
Start recording on this unit.
"No Signal" is displayed
and ~
indicator blinks in the display.
Start playback
of the connected
mini
component.
Recording starts automatically when the
connected unit starts playback.
Recording pauses when the connected
unit pauses or stops, and resumes when
the connected unit restarts playback.
After recording, press 9.
Note
Synchronized digital recording can be
done from a unitwith a DIGITAL OPTICAL
OUTPUT jack.
Synchronized digital recording may not
be done from some type of Aiwa mini
component.
Publicité
