BEMIS PURE CLEAN 2000 Notice D'installation page 10

EN | REMOVAL & CLEANING INSTRUCTIONS
A
B
1. Pull out the power supply cord(A). Make
sure to close the water connecti on. Detach
the water inlet hose (B) and drain the water.
3. Press the take off butt on to unlock the
hinges, slide the seat backwards to take the
toilet cover of the ceramic.
10
2. Press the water outf low butt on on the
back of the seat to drain any excess water
out of the toilet seat.
4. Use warm soapy water (e.g. washing-up
liquid) and a soft cloth to clean the surface
& hinges. Do NOT use harsh abrasives or
cleaners containing bleach or alcohol to
clean your toilet seat (e.g. general bathroom
cleaners and wipes), as this can damage the
surface of the seat and the hinge and is not
covered by warranty.