Publicité
Les langues disponibles
Les langues disponibles
Installation
Dryer Hood Base Reinstallation (for service)
Faucet Connections (for service)
Remove the #10 flat
head screw from the
A
underside of the faucet
body. Slide the faucet
spout cover forward and
up to remove.
Bradley • 215-1773 Rev. G; ECN 15-08-006
Secure the dryer hood base
B
to the basin with #10 screws
and washers.
Loosely secure the #10 x ¾"
A
screw and washer to the side
wall.
C
4/20/2015
Position the faucet spout
cover onto the faucet spout
body (lap style). Secure the
cover to the base with the
#10 flat head screw.
Connect the supply tube
B
to the faucet connector.
Feed the tube through
the basin access hole.
AV90
21
Publicité
