Publicité
Les langues disponibles
Les langues disponibles
AV90
7b Valve Assembly
Attach angle stops to hot and cold
B
stub outs. Attach 1/2" supply hoses
to hot and cold supply stops.
Angled Supply Stop
⁵⁄₈" O.D. x ³⁄₈" O.D.
16
¼" Supply Tube (from
faucet) black, left hand
Supply Hose, Cold
½" x 24"
Supply Hose, Hot
½" x 24"
D
4/20/2015
For clarity, the front dryer
hose is not shown.
Loosen the compression nut. Push the faucet supply
A
tube firmly into the tube connector until it is seated.
Retighten the compression nut by hand.
¼" Supply Tube (from
faucet) green, center
Valve, Hot
Valve,
Supply
Cold Supply
Attach transformer circuit plug to
transformer connector plug inlet on
gang valve bracket. Attach gang
valve to the wall. See Step 1a for
valve bracket anchor locations.
120V: Transformer will plug directly
into wall outlet.
230V: In-line transformer will
mount to the left side frame
bracket with a zip tie or other
method by installer.
Bradley • 215-1773 Rev. G; ECN 15-08-006
Three-Station Valve
TMA Valve (S45-2489) is shown
TL Valve (S45-2488) is similar
¼" Supply Tube (from
faucet) red, right hand
Green
Red
Black
C
Attach hot and cold
hoses to the valve.
Installation
Publicité
