CLEANING
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a bi-weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions.
1. Unplug heater before cleaning.
2. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off Front Outlet Grill.
12 English
STORAGE
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
You may also clean the heater
with high-pressured air, as well.
Cleaning is recommended before storage.
1. Unplug power cord, wrap cord and slide inside storage tray on
back of heater.
3. Use brush attachment on
household vacuum cleaner to
2. Cover, or place back in retail carton
vacuum any accumulated dust off
if available. This prevents heater
Inlet Filter on back of heater.
from accumulating dust over time.
4. Wipe down entire heater with
3. Store heater in cool and
soft, dry cloth.
dry location.
Note: Inlet Filter on back of heater
is not removable.
DISPOSAL
Dispose of all packaging
materials in an environmentally
responsible manner.
RESET HEATER
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut-off system cuts
power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Power heater On. Your Vornado Heater should now
function normally.
Note: If the safety shut-off system
repeatedly shuts off your heater or if it
will not reset after following the above
procedure, call Vornado Consumer
Services Department toll-free at
1-800-234-0604.
English
13