The machine has an automatic switch function that lets the
other two battery packs work when the first two battery
packs are depleted.
IMPORTANT
Optimize the power and performance of your new 2x24
mower by running with both batteries charged to 100%.
1. Open the battery door A (8).
2. Align the ribs on the battery pack (28) with the grooves in
the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door A.
6. Follow the same operations to install the battery packs in
the other compartment.
The motor starts only when you put in the safety key (30).
7.9
REMOVE THE BATTERY PACKS
1. Open the battery door A (8) or battery door B (10).
2. Remove the safety key (30).
3. Push and hold the battery release button (29).
4. Remove the battery packs from the machine.
8
OPERATION
WARNING
Wear eye protection during operation.
NOTE
NOTE
English
8.1
START THE MACHINE
23
1. Make sure safety key is inserted into slot.
2. Push and hold the start button (1).
3. While you hold the start button, grab the start handle (2)
in the direction of the handle bar.
4. Once the machine has started, you can release the start
button.
5. Press Turbo button (24) to speed up to 3,200 RPM.
Battery capacity indicator (23)
F indicates the capacity of two battery packs in the front two
ports.
R indicates the capacity of two battery packs in the rear two
ports.
Lights
Capacity
3 Green
The battery is above 80% capacity.
Lights
2 Green
The battery is above 55% capacity.
Lights
1 Green
The battery is above 30% capacity.
Light
Lights go out The battery is less than 30% capacity and re-
quires charging immediately
8.2
STOP THE MACHINE
1. Release the start handle to stop the machine.
Wait until the blade fully stops before you start the machine
again. Do not quickly turn the machine off and on.
11
1
24
2
WARNING
EN