Singer SP-550 Manuel D'instructions page 6

AUTO SHUT-OFF
The Auto Shut-Off feature deactivates electrical power to the heater when Pressing Plate has
been left in closed position against the Ironing Board. The Pressing Indicator Light (Orange) and
Steam Burst Ready Indicator Light (Orange) does not illuminate. Heater functionality is restored
when the Pressing Plate is lifted back up.
IMPORTANT: Auto Shut-Off does not mean power to the unit is totally cut off. Power is always
on, and the Power Indicator Light will remain illuminated until On/Off Switch is set to "Off" (O)
position. Unplug power cord.
FEATURES OF PROFESSIONAL STEAM PRESS
Your Steam Press provides clean, professional results every time!
• Variable temperature control
• Automatic Shut Off safety feature while open or closed
• Power Indicator Light
• Protects delicate fabrics like silk
IMPORTANT: DO NOT PLUG IN UNIT UNTIL YOU HAVE FILLED THE WATER TANK. DO NOT AT-
TEMPT TO PULL WATER TANK OUT COMPLETELY. FOR HOUSEHOLD USE ONLY.
FILLING WATER TANK
1. Place Professional Steam Press on a flat, level surface.
2. Turn Locking Knob to "Unlock" position to unlock Pressing
Plate.
3. Lift up Pressing Plate using Handle. It will automatically
stay in lifted position.
4. Pull Water Tank out. Note that Water Tank cannot be com-
pletely removed from unit; do not attempt to force it free.
5. Remove Water Tank Cap to expose Water Tank refill hole.
6. Using Measuring Cup (included), fill Water Tank up to the
150ml (5.07 oz) line with water.
7. Replace Water Tank Cap and push Water Tank back in main unit.
OPERATION
1. With Pressing Plate raised, plug power cord into electrical
outlet, and turn On/Off Switch to "On" (|) position.
2. Identify type of fabric to be pressed, then select correspond-
ing temperature setting using Temperature Control Dial. It is
best to start with the most delicate fabric first. Higher heat
will damage Nylon and Silks. Pressing Indicator Light will
illuminate. (A few minutes of heating time will be required to
reach selected temperature. Once Pressing Plate is heated,
Pressing Indicator Light will deactivate. You are now ready
to begin pressing.).
3. Lay fabric flat on Ironing Board.
6 – ENGLISH
Using the
Professional Steam Press

