Publicité
Les langues disponibles
Les langues disponibles
The pruner saw must be held with the right
hand on the handgrip and the left hand on the
grip surface. Before using the pruner saw, the
user must read and understand all information
and instructions in the instruction manual. The
user must wear appropriate personal protective
equipment (PPE). Only branch may be sawed with
the pruner saw. Materials such as plastic, rock,
metal or wood containing foreign bodies (e.g.
nails or screws) must not be processed!
Function description
The cordless pruner saw is equipped with a chain
quick tensioning system. The circulating saw
chain is guided over a blade bar (guide rail). The
device is provided with various protective devices
to protect the user.
Refer to the following descriptions for the function
of control elements.
TECHNICAL SPECIFICATIONS
Model No.
Rated input voltage
Weight (without charger + batteries)
Recommended charger
Chain pitch
Chain width
Teeth of the sprocket chain wheel
Length of the sprocket chain wheel
Acoustic pressure level (L
)
PA
Sound power level (L
)
WA
Guaranteed noise L
WA
Vibration
Temperature
Charging process
Operation
Storage
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
The stated vibration emission value was
measured in accordance with a standard testing
procedure and may be used to compare one
power tool to another.
The stated vibration emission value may also be
used for a preliminary exposure assessment.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• using the tool for different applications, or with
• the times when the tool is switched off or when
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1.
2.
CSM1051
3.
10.8V / 12V
4.
Approx. 1.28 kg
5.
USB 5V d.c. 1000mA
6.
6.35mm
7.
1.1mm
8.
6
9.
152 mm
10. Mounting knob
79dB(A); K
= 3dB(A)
PA
87dB(A); K
= 3dB(A)
11. Blade bar (guide rail)
WA
91dB(A)
12. Saw chain
ah=2.8m/s
; K=1.5m/s
2
2
13. Blade encasing
Max. 50 °C
14. Rechargeable battery
4 - 40 °C
14a. Release button
-20 - 50 °C
15. USB cable
0 - 45 °C
15a. USB port (Type C)
15b. USB port (Type A)
16. Mounting screw
17. Chain sprocket
18. Threaded bore
19. Chain tensioner pin
SAFETY FUNCTIONS
3 Switch-on block
The switch-on block must be released for
switching on the device.
different or poorly maintained accessories,
may significantly increase the exposure level.
it is running but not actually doing the job,
may significantly reduce the exposure level.
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns.
Front hand protection
Handgrip area
Switch lock
On/Off switch
Handle
Rear hand protection
Battery charge level indicator
Screw for the chain quick tensioning system
Sprocket cover
7
Publicité
