PRODUCT: Mermade Blow Dry Brush
Interchangeable
MODEL NUMBER: MH6001
VOLTAGE:
EU/AU/IND/UK 220-240V, 1200W, 50-60Hz
USA/CAN 125V, 1200W, 60Hz
LINE LENGTH: 2.5M
AS WITH MOST ELECTRICAL MACHINES,
ELECTRICAL PARTS ARE ELECTRICALLY LIVE
EVEN WHEN THE
SWITCH IS OFF. TO REDUCE THE RISK OF
BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS:
1. Always unplug appliance immediately after
using. An appliance should never be left
unattended when it is plugged in.
2. Do not use while bathing or sleeping.
3. Do not place or store the machine where it can
fall or be pulled into a tub or sink.
4. Do not place in or drop in water or any other
liquid.
5. If the tool falls into water, unplug it
immediately. Do not reach into the water.
6. Use this appliance only for its intended use as
described in this manual. Do not use
attachments not recommended by
manufacturer.
7. Always place the appliance with the safety
stand on a heat-resistant, stable flat surface.
8. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, of if
it has been dropped into water.
9. Keep cord away from the heated surfaces. Do
not wrap the cord around the appliance.
10.Do not use an extension cord. This appliance
is not intended for use by persons under the age
of 12 years old, unless supervised by an adult.
ATTENTION
1. It is recommended this appliance should not
be used by persons who have reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they are
supervised by a person responsible for their
safety.
2. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
3. Do not use this appliance near bathtubs,
showers, basins or other vessels containing
water.
4. Keep appliance out of reach from young
children, particularly during use and cool down.
5. Never leave appliance unattended when it is
connected to a power supply. Always place the
appliance with the safety stand on a heat-
resistant, stable flat surface.
6. Do not use on synthetic hair.
7. For additional protection, the installation of a
residual current device (RCD) having a rated
residual operating current not exceeding 30mA
is advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.
8. Always do a strand test before using on your
hair as heat can affect some hair colour, in
particular on freshly coloured or toned hair
MAINTENANCE
1. To clean the unit, be sure the unit is cool and
unplugged. Wipe the handle and barrel with a
damp cloth. No other maintenance is necessary.
2. Do not attempt to repair the appliance
yourself. This appliance has no user serviceable
parts.
3. Unplug the unit whenever it is not in use. Allow
it to cool, then store it out of reach of children in
a safe, dry location.
4. Never wrap the cord around the appliance,
since this will cause the cord to wear prematurely
and break, thus voiding warranty. Handle the
cord carefully and avoid jerking, twisting, or
straining it, especially at plug connections.
SAFETY
1. Take extra care to ensure the brush does not
contact skin or eyes.
2. Use a mirror when using the appliance to assist
with safe usage.
3. Do not place tool on surfaces that are not heat
resistant.