00049079bda
12.04.2007
Rear view of DR-20 DSL/broadband router
Printer
7,5 V
DC In:
Connection for the supplied power supply unit
USB Printer: USB printer port for connecting your printer using a USB cable
1 – 4:
Network cable connection of the computer or switch/hub
WAN:
For connecting the external DSL modem using a network cable
Reset:
If you hold Reset pressed longer than 5 seconds, the router is automatically
reset to the factory settings.
The hardware installation is now complete.
2. Installing the Software
The TCP/IP protocol must be installed on all PCs or notebooks that are to use the Internet. By
default, the IP address 192.168.1.1 and an activated DHCP server are configured for the rou-
ter. That means that the connected PCs are automatically given appropriate addresses and
other settings. We recommend using these. Select the TCP/IP setting Get IP address auto-
matically for all PCs or notebooks connected to the router. You can then configure the router
using the web browser. The browser must be Java-capable and the Java function must be
activated (e.g. Internet Explorer 5.5 or higher, or Netscape 7.0 or higher, Opera 6.0, Firefox
1.0, etc.).
To start the configuration process, open your browser and enter 192.168.1.1 as the address.
The login window is displayed.
The preset username is: admin
password:
After making the entry, click OK. The Basic Setup DHCP window opens.
The router must now be configured for the corresponding ADSL protocols. Access via
PPPoE (Germany), PPTP (Austria) and Static IP is described in the following pages. If you are
not sure which ADSL protocol you must use, contact your Internet provider.
Access via PPPoE:
Select the first option Get IP address automatically (PPPoE). Leave the host name and
domain name blank. You must specify your Internet provider.
Private IP Address:
You can allocate your internal IP address range here. We recommend that you do not chan-
ge anything.
11:39 Uhr
4
admin
10
Seite 10
3
2
1
WAN