GE 27959 Mode D'emploi page 22

3. Follow the automated instructions to get the information you need.
4. Hang up the phone and the phone automatically returns to pulse
(rotary) dialing mode.
V
OLUME
A S
NSWERING YSTEM
Adjust the base unit speaker volume by pressing the vol + and - button.
There are eight volume levels, and each press of the volume button
adjusts the speaker volume by one level. When you reach the maximum or
minimum volume level, the phone beeps twice.
S
PEAKERPHONE
Adjust the speakerphone volume by pressing the vol + and - buttons on
the base.
C H
ORDLESS ANDSET
Adjust the receiver volume by pressing the CID/VOL (< or >) buttons. There
are four volume levels, and each press of the CID/VOL (< or >) button
adjusts the receiver volume by one level. When the maximum or minimum
volume level is reached, the phone beeps twice.
P
AGING
This feature helps you locate a misplaced handset and send and receive
pages for intercom calls.
NOTE: Make sure the phone is OFF (not in talk mode). The ringer does not
have to be on for this feature to work.
P
AGING FROM THE
NOTE: Use only the base to page the handset.
Press the page/intercom button on the base. The handset is paged, and
emits a paging tone. PAGING FRM BASE shows in the handset display.
PAGING HANDSET shows in the base display.
22
All manuals and user guides at all-guides.com
B
ASE