GE 27959 Mode D'emploi page 14

1. Press the flash/program button until SET RING LEVEL >1HI 2LO 3OFF
shows in the display. The default setting is 1HI .
2. Use the touch-tone pad to select 1, 2, or 3 or use the cid/messages (< or
>) buttons to scroll to 1HI , 2LO , or 3OFF .
3. Press flash/program again to store your selection. You will hear a
confirmation tone (at the base only).
NOTE: If you turn the ringer OFF, "RINGER OFF" shows in the base display.
R T
INGER ONE
NOTE: This setting may be made with the base and the handset.
You may choose from three different ringer tones.
1. Press the flash/program button until SET RINGER TONE > 1 2 3 shows
on the base unit display or RINGER TONE > 1 shows on the handset
display. The default ringer tone is 1.
SET RINGER TONE
1 2 3
>
Prompt displayed on the base unit Prompt displayed on the handset
2. Use the touch-tone pad to select 1, 2, 3 or use the cid/messages (< or >)
buttons on the base unit or CID/VOL ( < or > ) buttons on the handset to
scroll to your selection. The ringer tone plays for few seconds.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
T /P
ONE ULSE
NOTE: This setting may only be made with the base.
14
All manuals and user guides at all-guides.com
SET RING LEVEL
1HI 2LO 3OFF
>
RINGER TONE 1
>