Publicité
Les langues disponibles
Les langues disponibles
Installation and adjustment
Positioning
The distance between the washing machine and the wall
should be more than 50mm, and the maximum allowed angle
of the shank base of the machine is 1.The slanting or rough
ground may cause operating stopped or unstable, please
adjust it with the following methods:
●Make it
horizontal
Use a tied
thread with
plumb to check
if it is
horizontal.
●Adjust the
adjustable foot
1.Lift up the
adjustable foot
gently, loose the
adjustable nut and
twist the adjustable
foot.
2.Fasten the nut
after adjustment.
10
Adjustable
nut
Fasten
Loosen
Adjustable
foot
High
Low
How to use drainpipe
1.the drainpipe must be hanged during use, the height is not
more than 4ft to avoid leakage or stop, if drain a long time,
the machine will stop running.
2. You can adjust the situation of the elbow bend pipe to
change the height of the drainpipe.
3. Do not extrude the drainpipe to ensue drain smoothly.
Elbow
Drainpipe
Less than 4ft
11
Publicité
