Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Maintenance methods
Clean the lint filter
●It is necessary to use lint filter during washing.
●After washing, please clean the lint filter in time.
Clean the lint filter according to the following steps:
1. Pull out the lint filter.(see llustration 1)
2. Open the lint filter and wash it.(see llustration 2)
3. Close the lint filter and install it to proper position.
Close
Open
(the black rubber block)
Illustration1
22
Press it and pull out the lint filter
Open
Close
The baffleplate
Illustration2
Maintenance
1.Once you have using the machine, you are advised to turn off
the water taps.(if necessary, pull out the inlet hose)
2. Do not keep water in tub for a long time. When washing is
finished，drain it right away.
3.Once you have finished using the machine, you are advised to
unplug it.
4. Put the electric cable and the drain hose in order.
5. Wipe the water on the surface and in tub with soft cloth and
keep the top lid opening for a while. It helps to prevent mould
and stagnant smells forming inside the appliance.
If the water in the inner tub has possbility to freeze,please do
like below:
1. In winter, if remaining water freeze can cause the washing
machine trouble,
please take off the water inlet hose and drain out the water in
the hose and inner tub.
2. If the water freeze, please don't operate the washing
machine. Put 104°F hot water in the tub, the hot water should
submerge the pulsator, after a few minutes, rotate
the pulsator by hand gently, then you can operate the washing
machine.
23
Publicité
