Publicité
Les langues disponibles
Les langues disponibles
Operation steps
1. Press power switch, put through power, the machine is in
state of beginning:
3. Press"process"button to begin process selection.
Times of
Selected
pressing
procedure
the"proce
program
ss"button
0
Wash, rinse,
spin
1
Soak, wash,
rinse ,spin
2
Wash
3
Wash, rinse
4
Rinse ,spin
5
Spin
Remarks: press Process button continually, the above mode will
be cycled in turn.
3. Select appropriate water level according to your laundries
quantity.
4. Close the top lid, press Start/Pause, the washing machine is
working.
5. When the washing is finished, buzzer alarm, power supply cut
off automatically.
20
Applicable
Contents(the
procedure
lighted indicator
indicate the
programs about
to run)
Standard
Wash rinse and
program
spin lights are on
For dirty
Soak, wash, rinse
laundries
and spin lights are
on
when use
Wash light is on
detergent
repeatedly
No need to spin
Wash and rinse
for laundries
lights are on
creased easily
Wash by hand
Rinse and spin
and need to rinse
lights are on
and rinse
Wash by hand
Spin light is on
and only need to
spin
Maintenance
Maintenance methods
After the end of the programme
The machine stops automatically ,and music buzzer will
remind you to take out the laundries or start again.
Once you have finished using the machine, you are
advised to unplug it and turn off the water taps to avoid
unexpected leak or fire.
External cleaning
Clean the exterior cabinet of the
appliance with soft cloth. Do not
use cleanser, volatile chemical
materials to clean the machine,
which will damage plastic parts
and the surface.
Clean inlet gate
It is possible that the inlet filter net can be blocked
by the dust, please clean it according to the follow steps:
1. Close the tap and turn on the power switch.
2. Start the washing machine for 5 seconds(make the water
in the inlet hose flows to the tub),and cut off the
powersupply.
3. Pull off the inlet hose, remove and clean the inlet valve
and the inlet net, and install again.
21
Publicité
