Bresser Smile 7004020CM3000 Mode D'emploi page 24

HUMIDITY UPPER LIMIT
AND LOWER LIMIT EXCEED
STANDARD SETTING
• Press SET button, humidity and
on, humidity value flashes, press UP
or DOWN button to adjust lower limit
humidity range (lower limit Max value
can not be bigger than upper limit Min
value, the Min value can be set to 25%,
setting unit is 1%/set.
• Press SET button, humidity and
on, humidity value flashes, press UP
or DOWN button to adjust upper limit
humidity range (upper limit Min value
can not be smaller than lower limit Max
value. The Max value can be set to 90%,
40
setting unit is 1%/set)
REMARKS
• Long press of the UP or DOWN button
shown
makes the value run faster.
• Lower limit of humidity set as 30%, when
humidity lower than 29%, only
• Upper limit of humidity set as 80%,
when humidity higher than 81%, only
flashes.
• After setting all values, press SET button
to save desired value or wait for about
shown
10 seconds.
CO ALARM ON/OFF
2
• Default setting is OFF (
visible).
flashes.
symbol is not