Télécharger Imprimer la page

CLAS OH 6020 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

OH 6020
CHARACTERISTICS
Rated capacity (safe working load): 2T
Lowered height: 76mm
Maximum height: 510mm
Dimensions: 1006x365x136mm
Net weight: 42Kg
• Read study and understand all warnings and operating instructions prior to use.
• Do not overload this jack beyond the rated capacity.
• This jack is designed for use only on hard level surfaces capable of sustaining the load. Use on other than hard
level surfaces can result in jack instability and possible loss of load.
• This is a lifting device only. Immediately after lifting, support the vehicle with jack stands.
• Do not go under or allows anyone under the vehicle until it has been supported with jack stands.
• Do not move or dolly the vehicle while on the jack.
• Lift only on areas of the vehicle as speci ed by the vehicles manufacturer.
• Center load on saddle prior to lifting.
• No alterations shall be made to the jack.
• Failure to heed these warnings may result in personal injury and/or property damage.
Because of the potential hazards associated with the misuses of equipment of this type, no alterations shall be
made to the product.
The owner and/or operator is responsible for providing maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order.
If the owner and/or operator is not uent in English or French, the product warnings and instructions shall be read
and discussed with the operator in his native language by the purchaser/owner or his designee.
Make sure that the operator comprehends its contents. Safety information shall be emphasized and understood
prior to usage.
The jack shall be inspected per the instruction manual prior to use.
It is the owner and/or operator's responsibility to study all warnings, operating and maintenance instructions
contained on the product label and instruction manual prior to operation of this unit.
Retain these instructions for future reference.
Raising vehicle:
1. Make sure the jack and vehicle are on a hard level surface.
2. Always set the vehicle parking brake and block the wheels.
3. Consult the vehicle owner's manual to ascertain the location of jack points and position the jack beneath the
prescribed lift point.
EXTRA LOW PROFILE SERVICE GARAGE JACK 2T 76mm
WARNING
USE

Publicité

loading