Publicité
Les langues disponibles
Les langues disponibles
•
Cleanln
Replacing Light Bulbs
To avoid electrical
shock which can cause severe
personal injury or death, disconnect
power to
refrigerator
before replacing
light bulb. After
replacing
light bulb, reconnect
power.
To avoid
personal
injury or property
damage,
observe the following:
• Allow light bulb to cool.
• Wear gloves when replacing
light bulb.
Fresh Food Section
1. Slide clear light shield toward
back of compartment
to release
r_4_
from light assembly.
-_ "_ ii:::
2. Remove light bulbs.
3. Replace with appliance
bulbs
no greater
than 40 watts.
4_
Replace light bulb cover by inserting tabs on light
shield into liner holes on each side of light
assembly. Slide shield toward front of refrigerator
until it locks into place. Do not force shield beyond
locking point. Doing so may damage light shield.
Freezer
Section
1. Reach behind the light
cover.
2. With firm pressure, press
forward on the notches at
the back of the cover and
pull down. The cover will
open from the back.
3. Remove the cover.
/4. Remove light bulb.
5. Replace bulb with
appliance
bulb no
greater
than 40 watts.
Insert front tabs of light
cover into slots in freezer
liner and snap rear
portion over light
assembly until rear tab
engages.
24
Publicité
