Mr. Heater Grand Teton Serie Mode D'emploi page 11

If there is an opening at the base of the chimney it
must be closed tightly.
MANUFACTURED CHIMNEY INSTRUCTIONS &
DIAGRAM
WARNING: DO NOT USE SINGLE-WALL
CONNECTION PIPE AS A CHIMNEY.
This stove is designed to be used with either a UL
103 or ULC S629 (CAN) listed manufactured chimney
or an approved UL-1777 (US)/ULC S635 or ULCS640
(CAN) lined masonry chimney. Not all manufactured
chimney are UL 103 or ULC S629 (CAN). Home centers,
hardware stores, HVAC supply stores, and the Online
websites of chimney manufacturers will be able to
provide stove pipe that is rated to these standards.
This listing indicates that the Chimney is rated for high
temperatures up to 2100˚F (1149˚C).
Only use components that all come from the same
manufacturer. Do not mix brands of components for
the same ventilation system.
The following figures illustrate various methods and
requirements of using a manufactured chimney and
connection pipes to vent the wood stove.
Figure 12 Manufactured Chimney through Roof
Wood Fire Stove
Figure 13
Manufactured Chimney through Masonry Wall
Insulated
Single-Wall
Figure 14 Manufactured Chimney through Attic
E1 1
Operating Instructions and Owner's Manual