Bang & Olufsen DVD 1 Mode D'emploi page 8

2.1 Brief operation guide
Brief operation guide
Buttons on DVD 1
Playback of DVD
DVD disc menu
On-screen tool bar
Connections to DVD1
Further information regarding daily use
- EJECT. Press to open or close the loader.
l n
- . Press to cue forward or backward during playback.
- PLAY. Press to start playback. Press again to pause playback.
V
- . Press to switch DVD 1 to standby.
- Load the disc in DVD 1. Press PLAY to start playback.
- Not available on all DVD discs. Press and hold GO (Beo1/Beo4) or press the yellow
button on Beo4 to gain access to special features such as information about the
making of a fi lm, interviews or specially edited scenes.
- Press DISPLAY on Beo1 or the blue button on Beo4 to gain access to the main
functions of DVD 1.
l n
Use to select function. Use
Press GO to store the choice and resume playback.
- Set switch according to the connected TV. Please note that:
If connection is made without a 21-pin AV cable set the switch for RGB.
- CVBS if BeoVision AV9000, BeoVision LX/MS/MX.
- Y/C if BeoVision Avant 50Hz, BeoCenter AV5.
- RGB if any other Bang & Olufsen TV.
- DIGITAL OUTPUT, AUDIO L, AUDIO R.
Used if connecting to a TV without using a 21-pin AV cable. Audio signals.
- DATA, Y/C, CVBS.
Used if connecting to a TV without using a 21-pin AV cable. Data and video signals.
- AV.
Used if connecting to a TV using a 21-pin AV cable. Data, audio and video signals.
- Please refer to the DVD 1 Guide for further information regarding daily use.
m p
to view setting choices for the function.
DIGITAL OUTPUT
AUDIO L
AUDIO R
DATA Y/C CVBS
CVBS
RGB
Y/C
AV