Bang & Olufsen DVD 1 Mode D'emploi page 12

Service mode
1 1
Picture settings
Sound settings
Subtitles
n
Other functions
Applikations SW version (1IC1)
Region setup
1 1 no off
p
- Use the buttons on DVD 1. Remove CD if such is loaded. Then disconnect DVD 1
from the mains.
Press and hold PLAY and
The SW version will appear in the display.
- Use the buttons on DVD 1. Remove CD if such is loaded. Then disconnect DVD 1
from the mains. Press and hold
The current setting will appear in the display.
l n
Use to change Region number. Press PLAY to store the desired number. Wait
approx. 15 sec. until the screen goes blue.
Please note: The number of times Region setting can be changed is limited. If this
limit is exceeded DVD 1 will cease to function.
Country and Region setting:
Australia - 4; Canada - 1; Estonia - 5; Ghana - 5; Hong Kong - 3; Indonesia - 3;
Latvia - 5; Lithuania - 5; Malaysia - 3; Morocco - 5; Nigeria - 5; Singapore - 3;
Taiwan - 8; Thailand - 3; USA - 1
- ACCESS CONTROL.
- STATUS WINDOW.
- LOW POWER STANDBY.
- PBC.
- (C) '99-'00 7.XX 000831
MPEG IC SW version:
SW date:
l
and then reconnect DVD 1 to the mains.
l n
and
Service mode, English
P21 4.3.11
Slash SW version:
Servo IC SW version:
and then reconnect DVD 1 to the mains.
5.1