SELT Pergola Solid Mode D'emploi page 5

Pergola Solid
+
The elements of the bearing construction
should be secured from falling down
The ready made construction should be
installed to the ground. The M12 bolts. The
bolts have not been added to the product
The leaflet is not an equivalent of a users manual.
Please download the Users Manual and motors instruction
PRODUCT PROPERTIES
EN 1090-1
EN 13561
Class 3
(EN 13561)
(the requirement to roll up the roof and roller blinds above 49 km/h)
Intensity to 100 L/ (hour×m
on max time up to 5 min.
Not allowed
(except for the fixed roof)
Necessary to leave the roof rolled up
Not allowed
Necessary to leave the roof rolled up
The requirements of cleaning and maintenance are listed in the
Users Manual
INSTALLATION REQUIREMENTS
)
2
After assembly of the whole construction
please check the correctness of the
diagonals, parallels and perpendicullars
of the Pergola walls and the posts
vertical placement
The electric connection should be made
only by a person with the proper
qualifications
The required angle of the roof slope
min/max 5 to 10 degrees
5
EN