Publicité
Test your camera prior to selecting a permanent mounting location.
Testez vos caméras avant de sélectionner l'emplacement permanent de montage.
Pruebe las cámaras antes de seleccionar un lugar de instalación permanente.
1. Use the included mounting template to drill holes for screws. Insert the included drywall
anchors.
2. Feed the cable through the mounting surface or your camera's cable notch, and then connect
the cables as shown in "Connecting Your Camera", pages 7-8.
3. Mount the camera stand to the surface using the included screws.
4. Loosen the adjustment screw and adjust your camera's position as needed, and then tighten to
secure it in place.
5. Remove the vinyl film from your camera lens when your installation is complete.
5
E89_Series_QSG_TRILINGUAL_R1.indd 8
E89_Series_QSG_TRILINGUAL_R1.indd 8
90°
360°
2022-02-25 7:33:26 PM
2022-02-25 7:33:26 PM
Publicité
