Operation - Domair TX-1601MF Manuel D'utilisation

Operation

• Position the unit on a firm, flat, horizontal surface.
• To avoid overloading the electrical circuit used, avoid connecting other devices to the same power outlet.
The device can be controlled either with its remote control or directly from its control panel.
3. ON/OFF key:
switches the fan on or off.
NOTE: The standby indicator lights up white as soon as the unit is connected to the power supply.
By pressing the ON/OFF button, speed 1 is automatically selected.
4. SPEED key:
selection by successive presses of speeds 1, 2 or 3 (Low, medium, high).
NOTE: The corresponding number is displayed on the screen to indicate the selected speed.
Rev 0_02 09 19 Fabriqué en Chine Page 24