Description; Assembly - Domair TX-1601MF Manuel D'utilisation

Description

A – motor unit + control unit
B – front protection guard +
mist diffuser
C – rear protection guard
D – fan propeller
E – base
F – castors
G – rear guard fastening nut
and control unit
H – propeller nut
I – remote control
J – manual

Assembly

Proceed step by step with reference to the following
drawings:
15 Install the 4 casters on the base.
16 Place the motor unit on the control unit
17 and secure it by firmly tightening screw AA.
18 Place the control unit on the base
19 and secure it by tightening screw G.
20 Install the rear guard on the motor unit respecting the
adjustment of notches and centring pins.
21 Screw clamping nut G on the guard.
22 Insert the propeller on the motor shaft.
23 Then screw on tightening screw H of the propeller
(Please note: it needs to be screwed in an anti-
clockwise direction).
24 Attach the front guard to the back guard using the top
clip.
25 Secure the whole device by closing the cover located
at the bottom of the guards,
26 Firmly screw on screw BB of the guard safety device,
– IMPORTANT: after assembly, never disassemble the
guards during use or maintenance.
27 Connect the flexible tube into the body of the mister.
28 The remote control can be positioned in the
receptacle provided for this purpose.
Rev 0_02 09 19 Fabriqué en Chine Page 22