Air Cooling - Lea LE36260-60DR Mode D'emploi

outside (facing the cleaner cover).
5) After that, replace the cleaner cover.
Important: a clogged air cleaner reduces engine performance. Operating with no element
or with a bent or damaged element causes irregular wear and tear of the engine
mechanism.

9.4 Air cooling

This engine is air-cooled. Dust clogging up the air cooling inlet port and the cylinder fins will
cause the engine to overheat. Periodically check and clean the cylinder fins after removing
the air cleaner and the cylinder cover.
9.5 Sparking Plug
Starting problems and misfiring are often caused by a fouled sparking plug. Periodically clean
the sparking plug, and replace with a new one as and when required
Important: When dismounting the plug cap, be careful not to remove the seal.
Operating the engine without the seal may cause the engine to overheat.
Important: When inserting the sparking plug, first screw it in with your fingers, and
then tighten it with the help of a suitable plug spanner. Overtightening will damage the
cylinder and the piston.
9.6 Gearbox (Fig.15)
Apply multipurpose grease after every 25 hours of use.
9.7 Silencer
After 100 hours of use
Check to see if any oil or grease has worked its way in between the clutch lining and drum, and
if it has, wipe it away using oil-free and unleaded petrol.
Maintenance before storage
22