Lea LE36260-60DR Mode D'emploi page 25

Cylinder fins,
intake air
cooling vent
Silencer,
spark arrester,
cylinder
exhaust port
Throttle lever,
ignition switch
Cutting parts
Gearbox
Screw/nuts/bolts
Warning: Before cleaning, inspecting, or repairing the unit, make sure that the
engine has stopped and is cool.
9.1 Blade lubrication (Fig.10)
Warning: before lubricating, be sure your unit is switched off and that the blade has
come to a complete stop.
For easier operation and longer blade life, lubricate the blade before and after each use.
Apply light machine oil along the edge of the blade bar.
9.2 Safety lock (Fig.11)
Warning: Stop using the trimmer if the safety lock is defective.
Safety lock is the device which stops the throttle lever from being activated unintentionally. If
you push the safety lock, you will activate the throttle lever
Safety lock:
1) Check that the throttle lever does not move if you do not push the safety lock.
2) Check that the throttle lever moves if you activate or release it while pushing the safety
lock.
3) Check that the safety lock returns to its original position if you take your hand from safety
lock.
4) If these checks reveal any defects, contact your nearest dealer and ask to have them
repaired.
9.3 Air cleaner (Fig.12-Fig.14)
1) Release the air cleaner cover and remove the dust.
2) If the element is dirty, clean it by tapping it or by blowing away the dirt.
3) If the element is bent or damaged, replace it.
4) After you have cleaned the element reattach it to the cleaner body with the stamp on the
Clean
Clean
Check v
operation
Replace if v
something is
wrong
Grease
Tighten/replace v
v
v
v
21
v Not
adjustin
g
screws