Reely ROAD Firestar Notice D'emploi page 44

All manuals and user guides at all-guides.com
Setting Rear Axle Camber:
For setting the camber, turn the upper transverse link
(1) as for the front axle.
Because the upper transverse link has a left and right
hand thread at either end, the transverse link does not
1
need to be dismantled for the camber to be adjusted
There are several more suspension points (2) for the
2
upper transverse link at the axle stub. When the wheel
rebounds, the camber changes depending on the in-
stallation position (e.g. stronger camber when the
wheel is pushed in).
2
44