Publicité
Les langues disponibles
Les langues disponibles
B
• Use the screw driver loosen the ST4*8MM self tapping
screw (2pcs) from the lighting panel, take out the lighting
fixture. Open the terminal box that connected with the
wire, disconnect the wire connector and replace the lamp.
• ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 1×2 W
– Voltage range: AC 110-240V
– Dimensions:
Information for dismantling
Do not dismantle the appliance in a way which is not shown
in the user manual. The appliance could not be dismantled by
user. At the end of life, the appliance should not be disposed
of with household waste. Check with your Local Authority or
retainer for recycling advice.
Useful information
15
EN
Publicité
