Publicité
Les langues disponibles
Les langues disponibles
Fuse
Access Cover
11. Connect Panel to the PDS
WARNING: Risk of electric shock or product damage. Make
sure the power cord is unplugged before removing the access
cover.
Remove the PDS access cover.
IMPORTANT! When possible, connect the cables through the side
holes of the PDS rather than the cover holes to ease cover removal
for servicing.
Prepare cable ends for installation into the PDS by unthreading
the strain relief cap and separating the rubber stopper from the
threaded body. This will prevent the cables from twisting when
the strain relief is threaded into the box.
Insert the Chroma power cable into a 1/2" NPT hole and install
into the "RAIN PANEL" connector until it snaps together.
Insert the Chroma data cable into a 1/2" NPT hole and install
into the "DATA IN" connector until it snaps together.
Kohler Co.
All manuals and user guides at all-guides.com
Strain Relief Fitting
PDS
Chroma Data Cable
21
Cap
Chroma
Power Cable
1078520-2-A
Publicité
