Publicité
Les langues disponibles
Les langues disponibles
4) Press <SELECT> shortly once to enter the alert mode set-
ting mode.
5) Press <> or <> shortly to select the alert mode (SIREN
& VOICE).
Note: The selected alert mode will appear in the display.
6) After setting, press <SELECT> shortly to save.
SETTING COUNTY CODES (CLC CODES IN CANADA)
County code setting is described below.
A county code instructs the radio only to receive an ALERT
when the code is programmed in. Look up a United States
county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/
index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or
can be set to receive ALL coded information sent from any
transmitter, if your within range. When you set codes, it will
only pick up alerts when you're in that county or within recep-
tion distance of the signal.
To set codes:
1) Revolve the <Band Selecting Knob> to the "OFF"
position.
2) Press the <MENU> button shortly to enter the setting
menu.
16
SOLARLINK FR600
OWNER'S MANUAL
3) Press or shortly to select the "COUNTY CODE" option.
4) Press <SELECT> shortly once to enter the county code
setting mode (MULTI, SINGL or ALL), which blinks in the
display.
5) If you don't know your county code, select ALL with or
and press <SELECT> and then <MENU> TO EXIT. If you
know your code, don't press SELECT and go to the next
section.
6) Press or shortly to select MULTI or SINGL and press
<SELECT>.
7) Press <SELECT> shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 flashing.
8) Press <SELECT> again and the first digit of six starts flash-
ing. Press or to set the first digit and then press to go
to the second digit, doing this again and again until all six
digits are entered.
9) If you're in SINGL, press <SELECT> and then <MENU> to
exit. If in MULTI, go to the next step.
10) If you're in MULTI and wish to enter more codes, press
<ENTER>.
11) 01 flashes. Press or to go to another code setting
number (1-23 flashes) and press <ENTER>.
12) The first digit of six flashes, use or to set it and press to
enter the next number, doing this again and again until all
six digits are entered.
13) Press <ENTER> to choose another code number (1-23)
and when your finished press <ENTER> and then MENU
to exit.
SOLARLINK FR600
OWNER'S MANUAL
17
Publicité
