Publicité
TOASTING BREAD
1. Place your Toaster on a flat, level surface.
2. Plug the Toaster into a 120V AC electrical outlet. The Browning
Level Lights will illuminate.
3. Adjust the toast color desired by pressing the
the
DARKER Browning Controls. The Browning Level Lights
will indicate color selected.
4. Remove all protective wrappings from food before placing
into the Toasting Slot. Avoid toasting torn bread slices or
broken pastries that may get lodged in Toasting Slot.
5. Insert the bread, bagel, or toaster food into the Toasting Slot.
Press the Toasting Lever downward until it locks into place.
The Centering Guides will automatically center the food for
even toasting. When the food is lowered into position, it will
automatically begin to toast. The Toasting Indicator Light will
illuminate.
NOTE: The Toasting Lever will not lock into position unless the
Toaster is plugged in!
NOTE: When toasting a single slice, the bread or toaster food may
be placed anywhere in the Toasting Slot.
NOTE: To prevent a fire hazard, never place bread over the
opening of the Toaster, but always place it into the Slot.
NOTE: DO NOT change the Adjustable Browning Control selection
during the toasting cycle. First press
the Browning Controls to adjust the browning level. Replace
bread and toast until the desired toast color is achieved.
6. When the toast reaches the selected browning level, it will
pop up. The Toasting Indicator Light will turn off.
7. Remove bread from Toasting Slot. Use care when removing
bread as the bread and Toaster will still be hot.
8. Unplug cord from wall outlet when not in use.
CANCEL, then press
6
LIGHTER or
Publicité
