THINK GIZMOS DINOBLASTER Mode D'emploi page 4

2. MAINTENANCE & TROUBLESHOOTING
2.1 Battery Installation
● Ensure the Toy is switched off, remove the battery covers.
● Insert 3x AA batteries (supplied) into the toy observing the correct polarity as indicated.
● Re-fit the battery cover and secure.
(Warning - Remove the batteries if the toy is not going to be used for a long time.)
2.2 Care & Maintenance
Keep the DinoBlaster clean by wiping it with a soft dry cloth.
●
Keep away from exposure to direct sunlight for extended periods and keep away from
●
direct heat sources.
● Remove batteries when not in use for an extended time.
● Do not drop on a hard surface or disassemble the unit.
● Do not immerse in water.
2.3 Troubleshooting
If you are having problems with your DinoBlaster
● Turn the unit off.
● Remove the battery cover and take out batteries.
● Wait a minute for the power to dissipate.
● Replace batteries and secure the battery cover.
● Turn the unit on.
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
All manuals and user guides at all-guides.com
help@thinkgizmos.com
.
4