EIBENSTOCK MXT 100.1 Notice Originale page 11

Technical Data
Rated voltage:
Rated power input:
Rated current:
Frequency:
No Load Speed:
Load Speed:
Max. basket diameter:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Order number:
Stirrer with stirring rod and operating instructions in a set box
Application for Indented Purpose
The stirrer MXT 100.1 is designed for use in mixing bigger quantities of liquid
media, such as paint, glue, tile cement and others up to 40 kg.
The diameter of the used stirrers should not be bigger than 120 mm.
The stirrer MXT 100/2 is designed for use in mixing bigger quantities of liquid
media, such as paint, glue, tile cement and others up to 50 kg.
The diameter of the used stirrers should not be bigger than 140 mm.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and the safety instructions
completely and follow the instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the connection cable gets damaged or cut during the use,
do not touch it, but instantly pull the plug out of the socket.
Never use the tool with a damaged connection cable.
Supply
MXT 100.1
230 V ~
1100 W
5,0 A
50 - 60 Hz
1000 rpm
0 – 580 rpm
120 mm
M 14
IP 20
about 3,9 kg
EN 55014 and EN 61000
071I1000
10
MXT 100/2
I 390 rpm
II 700 rpm
I 0 – 230 rpm
II 0 – 410 rpm
140 mm
II
about 4,2 kg
071I2000