Bushnell STABLE VIEW 18-1035 Mode D'emploi page 10

BATTERY INSTALLATION
1) Slide the battery compartment release
switch on the handstrap to the Open
position to release the battery holder.
2) Insert two new size AA alkaline batteries.
3) Attach the battery holder to the handstrap
and slide the release switch to the locked
position to secure the compartment.
WARNING
• NEVER slide the stabilization
lever to the ACTIVE position if
you do not have two batteries
installed. Damage could result.
• Use the same type of batteries. Do
NOT mix old and new batteries.
Doing so can cause leakage or
rupture.
• When changing the batteries
outdoors, be sure not to let
any water get into the battery
compartment.
• If you plan to leave the binoculars
stored for a prolonged period,
remove the batteries in order to
prevent natural discharge and/or
leakage.
When the batteries are removed,
keep the battery holder attached
to the handstrap to protect the
internal contact points.
• Keep the contact points away from
any metal. Damage could result.
4
All manuals and user guides at all-guides.com
SPECIFICATIONS
Magnification
Objective Lens Diameter
Compensation Angle (stabilization correction) 3
Eye Relief
Field of View
Minimum Focusing Distance
Exit Pupil
Interpupillary Adjustment Distance
Dimensions: LxWxH
Weight
Battery
Safe Ambient Temperature Range
Specifications and designs are subject to change without notice.
10x
35mm
12mm
260ft. at 1000yds/86.6m at 1000m
12ft.
3..5mm
53 to 74 mm
7.25 x 6 x 3.5 inches (without strap)
43.9oz/1244g
(2) Size AA alkaline batteries (not included)
-10 C to 50 C (14 F to 122 F)