Press the tab on the cover to
open the cover.
Remove any extraneous matter
from the filter.
TROUBLESHOOTING
Problem
Appliance does
not start.
Door cannot be
opened.
Water leakage
Detergent residues
in the detergent drawer
Indicator or display
does not work.
Abnormal noise
Possible Cause
Door is not closed properly.
Clothes are stuck.
Safety protection is activated.
Connections are not tight
enough.
Detergent is damp and/or
clotted.
PC board or harness have
connection problems.
Transit bolts are still in place.
Floor is not solid or level.
Remove the filter by turning it
anticlockwise.
After cleaning, replace the filter by
turning it clockwise until it is in place.
Close the cover until a click is heard.
Solution
Close the door properly and
restart.
Check the laundry.
Disconnect the power and
restart.
Check and fasten the water inlet hose.
Check and clean the outlet hose.
Clean and wipe the detergent drawer
dry.
Switch off the power and check if the
mains plug is connected properly.
Check if the transit bolts have been
removed.
Make sure the appliance is installed on
a solid and level floor.
20