Publicité
Les langues disponibles
Les langues disponibles
Your washing machine must be properly earthed. We will not be held responsible for any damage that
may occur as a result of usage without correct earth connection.
Do not use extension leads or multi-sockets.
The appliance must not have an external switching device such as a timer or connected to a circuit that
is regularly switched on and off.
Do not pull the plug out of the mains outlet if there is flammable gas around.
Connecting the hoses
Connecting the water supply hose
1.
Attach one end of the hose to
the water inlet on the appliance
and tighten by hand.
NOTE :
After completing connection, turn on the tap slowly and make sure there are no leak.
Do not twist, squash, modify or cut the hose.
Connecting the drain hose
To connect the drain hose, please use one of the following methods.
Make sure that the drain hose is not bent, crushed or extended.
• Put the hose into a drain hole.
Drain
hole
2.
• Connect the drain hose onto a sink outlet spigot securely.
6
Attach the other end of the hose
to the tap and tighten by hand.
The drain hose should
not be placed higher
than
100 cm above the
floor.
Water in the
appliance does not
drain or drains slowly
if above this height.
Publicité
