Cisco 350 Guide De Démarrage Rapide page 14

XG—(Green) Located on the right of a 10G port. The LED lights steady
when another device is connected to the port, is powered on, and a 10
Gbps link is established between the devices. When the LED is off, the
connection speed is under 10 Gbps or nothing is cabled to the port.
Gigabit—(Green) Located on the right of the OOB port. The LED lights
steady when another device is connected to the port, is powered on, and a
1000 Mbps link is established between the devices. When the LED is off,
the connection speed is under 1000 Mbps or nothing is cabled to the port.
SFP+ (if present)—(Green) Located on the right of a 10G port. The LED
lights steady when a connection is made through the shared port, and
flashes when the port is passing traffic.
Reset Button
The switch can be reset by inserting a pin or paper clip into the Reset
button opening on the front panel of the switch. See Returning the
Switches to the Factory Default Settings for details.
Back Panel
The power port and console port are located on the back panel of the
switch. The back panel of your particular switch may look different, and if
your model has a fan, allow for adequate air circulation.
Power—Connects the switch to AC power.
Console—Connects a serial cable to a computer serial port so that it can
be configured by using a terminal emulation program.
14 Cisco 350 Series and the Cisco 350XG Series Managed Switches