IFM Electronic efector500 PI2959 Notice Utilisateurs page 23

Mounting of the adapter
Step 1
Grease thread and O-ring of the
sensor, and the sealing areas of
the adapter.
Make sure that the O-ring (B) is
correctly positioned.
B
Step 2
Screw the sensor into the
adapter.
Step 3
Clamp sensor and adapter
into a clamping device (E). The
sealing chamfers (F) must not be
36
damaged. Tighten the sensor
E
with a spanner until you can feel
F
the end stop.
Welding adapter
Weld the adapter first. Then mount the sensor.
24