Télécharger Imprimer la page

Kenwood FP940 Serie Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
slicing/shredding discs
reversible slicing/shredding discs
- thick
, thin
Use the shredding side for cheese,
carrots, potatoes and foods of a similar
texture.
Use the slicing side for cheese, carrots,
potatoes, cabbage, cucumber,
courgette, beetroot and onions.
fine (Julienne style) chipper disc
Use to cut: potatoes for Julienne style
French fries; firm ingredients for salads,
garnishes, casseroles and stir fries (eg
carrot, swede, courgette, cucumber).
rasping disc
Grates Parmesan cheese and potatoes
for German potato dumplings.
safety
G
Never remove the lid until the cutting disc
has completely stopped.
G
Handle the cutting discs with care - they are
extremely sharp
to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip
with the appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you
want to use. The pusher contains a
smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put
the large pusher inside the feed tube.
To use the large feed tube - use both
pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly
with the pusher - never put your
fingers in the feed tube.
All manuals and user guides at all-guides.com
, place the disc onto the drive shaft
.
hints
G
Use fresh ingredients
G
Don't cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
G
When using the chipper disc, place ingredients horizontally.
G
When slicing or shredding: food placed upright
shorter than food placed horizontally
G
There will always be a small amount of waste on the plate or in
the bowl after processing.
citrus press
Use the citrus press to
squeeze the juice from citrus
fruits (eg oranges, lemons,
limes and grapefruits).
cone
sieve
to use the citrus
press
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly
over the bowl handle
3 Place the cone over the drive
shaft turning until it drops all
the way down
.
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
G
The citrus press will not operate if the sieve is not
locked correctly.
4
comes out
.
.

Publicité

loading