Aosom Audi RS e-tron GT Instructions D'assemblage page 15

- Remove the nut and gasket from the rear axle.
- Install the wheel, gasket and nut onto the rear axle – tighten the nut with a wrench.
- Install the cover onto the wheel.
- Repeat these steps for the wheel on the other side.
3.Installing the steering wheel
- Connect the steering wheel cable to the instrument panel.
- Plug the cable into the cable hole.
- Align the steering wheel with the connector.
- Align the windshield onto the car body.
- Fix the clip into the hole.
2.Installing rear wheels
4.Installing the windshield
15