CLEANING THE MOTORIZED FLOOR BRUSH
1. Unlock the floor brush before removing it. (picture)
2. Clean the brush by removing any tangled debris or hairs.
3. Install the brush back in place after cleaning it.
4. Locked the floor brush before using it.
BATTERY REMOVAL AND DISPOSAL
Discared batteries are nonenvironmental friendly and disposed of it in accordance with applicable
regulations.
•
Discharge the battery by running the appliance to stop the motor at idle.
•
Remove the battery from the appliance.
•
Dispose of the battery to a collection of chemical waste from.
TROUBLESHOOTING
Problems
Vacuum Cleaner not operate
Vacuum cleaner unable to pick
up dust or weak suction
Dust escaping from air outlet Dust container is full.
Reason
Vacuum out of battery.
Vacuum need to be service.
Dust container is full.
Dust container need to be clean. Remove dust container filter
Dust container filter is not installed
correctly.
Puncture / hole in dust container
filter.
Solutions
Fully charge the battery before
use.
Please empty the dust container.
and check for any blockage in
air flow and remove it.
Please empty the dust container.
Please install the dust container
filter correctly.
Replace dust container filter.