Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION OF USE
Before using the Cordless Vacuum cleaner for the first time, clean it with a soft damp cloth and
dry thoroughly.
1. Do not immerse the Cordless Vacuum cleaner in water or any other liquid.
•
Assembling the Cordless Vacuum cleaner.
•
Assembling the aluminum tube.
2. Fit the tube into the main body's air inlet until it clicks into the position.
•
If need to remove the tube, hold the main body, press the release button and remove the tube.
•
Assembling the motorized floor brush.
3. Fit the electrical floor brush on the tube until it click into the position.
•
If need to remove the motorized floor brush, hold the aluminum tube, press the floor brush
release button and remove the floor brush from the tube.
ASSEMBLING THE CREVICE TOOL
Fit the accessory on the main body's air inlet and/or on the tube until it click into the position. The
crevice tool is good for cleaning stairs, corners.
OPERATING THE VACUUM CLEANER
Before first time use, ensure the vacuum cleaner has been charged 4-5 hours. Turn on the Cordless
vacuum cleaner by pressing the ON/OFF button on the control panel.
Note: Battery indicator light represents battery capacity and will illuminate during use The indicator
light will extinguish one by one as the battery runs out.
WARNING: Do not use the Cordless Vacuum cleaner without the filter or dust container not in
position.
Publicité
