Publicité
Les langues disponibles
Les langues disponibles
CHARGING THE VACUUM CLEANER
1. Turn off the Vacuum Cleaner.
2. Connect the adapter to the charging port on the main motor.
3. Plug the adapter into the main power supply.
The battery indicator display light will flashes during charge. Once the battery fully charged, the
battery indicator lights will be illuminated.
WARNING: Do not use any main power adapter other than that supplied, as using an alternative will
increase the risk of injury and/or damage to main product.
CARE AND MAINTENANCE
Filter replacement and cleaning
1. Turn off the vacuum cleaner
2. Press and hold the dust container release button and rotate the dust cup at a clockwise angle of
30° then remove the whole dust container.
3. How to clean the dust container:
•
Without removing the dust container, Press the dust container cap release button directly, then
remove the dust into waste container.(fig. A)
•
Or you can remove the dust container and Press the dust container release button directly, Then
drop the dust into waste container. (fig. B)
Battery Indicator
Dust cup release button
Publicité
