HumanTechnik Signolux A-2675-0 Mode D'emploi page 19

Upon first launch of the app, the operating system will ask for the permission to
send notifications. Please select „Allow".
After completing the previous steps, select the settings icon .
In the settings, you need to enter the ID number and code, which is unique to
every Signolux-Gateway device (see the image on page 17).
You will find the ID and code on the label underneath the device as well as on
the back cover of this manual.
After entering, select »Test settings«. The message »Testing connection...« is
displayed.
After the message »Test successful!« has been indicated, select »Save set-
tings« to save the ID-number and code entry.
The app is now ready to receive alerts from the Signolux-Gateway.
English 19