HumanTechnik Signolux A-2675-0 Mode D'emploi page 16

Setup
1. Connecting the network cable
Plug the supplied network cable into the network socket located on the rear pa-
nel of the device. Plug the other end of the network cable into a free LAN port of
your internet router.
2. Connecting the power supply
Connect the Micro-USB-Plug of the power supply unit with the power-in-socket
located on the rear panel of the Signolux-Gateway ein. Plug the power supply
unit into a mains electricity socket.
The Gateway will configure itself automatically with the router. This procedure
may take a few minutes to complete.
The Signolux-Gateway is now ready to receive the alerts of the Signolux system
and to forward these in encrypted form to the internet.
Internet
router
English 16
Signolux Gateway
Signolux
transmitters
Smart
phone
Power supply
* or WiFi connection