SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not plug several
appliances into the
same multiple power
board.
The freezer should
always be plugged
into its own individual
electrical outlet which
has a voltage rating
that matched the rating
plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock or fire.
• Do not use a cord that
shows cracks or abrasion
damage along its length or at
either end.
• Do not bend the power cord
excessively or place heavy
articles on it.
• Do not use aerosols near the
freezer.
CHEST FREEZER-00.indb 4
All manuals and user guides at all-guides.com
English - 04
- Aerosols used near the
freezer may cause an
explosion or fire.
• Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and cause fire or
electric shock.
• Make sure that the power
plug is not squashed or
damaged by the back of the
freezer.
• When moving the freezer,
be careful not to roll over or
damage the power cord.
- This constitutes a fire hazard.
• This appliance should be
positioned in such a way that
it is accessible to the power
plug.
- Failing to do so may result in
an electric shock or fire due
to electric leakage.
• This appliance must be
properly grounded.
• Do not ground the appliance
to a gas pipe, plastic water
pipe, or telephone line.
- You must ground the freezer
to prevent any power
leakages or electric shocks
15. 1. 30.
3:46