VOLTCRAFT SPS-1000 Mode D'emploi page 2

OPERATING INSTRUcTIONS
SPS-1000 USB POwER ADAPTER
ITEM NO.: 51 83 75 (Mini-USB)
ITEM NO.: 51 83 76 (Micro-USB)
INTENDED USE
This product is designed for charging or operating USB devices. Power is supplied via a
standard mains socket (100 – 240 V/AC, 50/60 Hz). The product is only to be used indoors in
dry conditions.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
DELIVERy cONTENT
• Power adapter
• Operating instructions
SAfETy INSTRUcTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Persons / Product
• The device generates heat during operation. Ensure adequate housing and do not
cover the housing during operation.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not
covered by these operating instructions, please do not hesitate to contact our technical support
or another qualified specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 180/586 582 7.
All manuals and user guides at all-guides.com OPERATION
VERSION 11/11
1.
2.
3.
cLEANING
Wipe the housing of the USB power adapter with a slightly damp cloth. Only use water to
moisten the cloth. Do not use chemicals or cleaning agents when cleaning.
DISPOSAL
TEchNIcAL DATA
Input voltage ................................. 100 – 240 V/AC, 50/60 Hz
Input current ................................. 130 mA
Output voltage .............................. 5 V/DC
Output current ............................... max. 1000 mA
Operating temperature ................. 0 to +35 ºC
Operating humidity ....................... 20 – 85 %
Storage temperature ..................... -20 to +60 ºC
Storage humidity ........................... 10 – 90 %
Cable length ...................................1 m
Dimensions (W x H x D) ............... 74 x 40 x 23 mm
Weight ...........................................40 g
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© copyright 2011 by Voltcraft®
Always turn off the electrical load before pluging/unpluging the USB load to the
USB power adapter. Ensure connection is proper. If the USB power adapter is
connected improperly, it may heat up or may cause electric shocks, fire, etc.
The total consumption of the USB device connected to the USB power adapter must not
be higher than 1000 mA.
Plug the USB power adapter to a mains outlet of 100 – 240 V/AC, 50/60 Hz.
Connect a USB device to the USB power adapter.
Check your USB device for the charging / operating status. Disconnect your USB device
when charging is completed.
Electronic devices are recyclable waste and must not be disposed of in the household
waste!
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Legal notice