Télécharger Imprimer la page

Kenwood CM200 Serie Manuel D'instructions page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
l
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
l
Your coffee maker will keep the
coffee warm and then switch off
after approximately 40 minutes. The
indicator light will go out when the
keep warm stops. If you want to
continue keeping the coffee warm
then switch the coffee maker off
then back on, the coffee will then
keep warm for another 40 minutes.
l
If you have not used the appliance
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
l
Always switch off, unplug and allow
to cool before cleaning.
l
Don't wash parts in the dishwasher.
carafe and lid, filter holder
and permanent filter holder
l
Wash, then dry.
body
l
Wipe with a damp cloth, then dry.
Don't use abrasives - they'll scratch
the plastic and metal surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two full
tanks of water (without coffee)
through the coffee maker to clean it
out.
4 Wash the parts.
service and customer
care
l
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
l
If you experience any problems with
the operation of your appliance,
before requesting assistance visit
www.kenwoodworld.com.
l
Please note that your product is
covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
l
If your Kenwood product
malfunctions or you find any defects,
please send it or bring it to an
authorised KENWOOD Service
Centre. To find up to date details of
your nearest authorised KENWOOD
Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
l
Designed and engineered by
Kenwood in the UK.
l
Made in China.
4

Publicité

loading