Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Air compressors should be operated
on not more than a 50% duty cycle.
This means an air compressor that
pumps air more than 50% of one
hour is considered misuse, because
Contents of Carton
1 - Air Compressor
2 - Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
2 - Rubber Bumpers
2 - Screws, 1/4-20 x .75
Tools Required for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
Unpacking
1.
Remove all packaging leaving
the air compressor on the pallet.
2.
Remove and discard the (4)
screws holding the air
compressor to the pallet.
Screws
It may be
necessary to brace
or support one side of the air
compressor when removing the
pallet because the air compressor
will have a tendency to tip.
3.
Carefully remove the air
compressor from the pallet.
D24445
DUTY CYCLE
the air compressor is undersized for
the required air demand. Maximum
compressor pumping time per hour is
30 minutes.
ASSEMBLY
Assemble Wheels
one side of the outfit when
installing the wheels because the
compressor will have a tendency to
tip.
1.
Attach wheels with shoulder
bolts and nuts as shown.
Nut
2.
Tighten securely. NOTE: The
outfit will sit level if the wheels
are properly installed.
provide adequate clearance,
stability or support for pulling the
unit up and down stairs or steps.
The unit must be lifted, or pushed
up a ramp.
Assemble Rubber Feet
1.
Attach rubber feet with the
screws provided as shown in
previous figure.
2.
Tighten securely.
10- ENG
It will be necessary
to brace or support
Rubber
Feet
Screw
Wheel
Shoulder
Bolt
The wheels and
handle do not
Publicité
